Animal Feed Pellet Mill

Description 

Animal feed is a general term for all kinds of animal feed, including poultry, livestock and aquatic animals. For farmers, there are many factors that affect the choice of feed, such as animal species, animal age, nutrients required by animals, feeding methods, local climate, raw material supply, animal feed cost, etc. This Animal Feed Pellet Mill is used to make animal feed. The machine has high working efficiency and stable operation, which greatly saves labor.

Pre-cleaner: 

Mainly for raw material such as corn or wheat cleaning, aims to remove the impuritis in it, ensure the material and final feed product is clean and safety. This cleaner can be located at the top floor in the cleaning section which can make good use of the gravity of raw mateiral to save energy for you. Some customer may build silo system before the feed mill plant, and raw material cleaning will be included in this system.

Hammer crusher: 

Used to crush grains into small size particle which is suitable for pellet making in the pelleting section. The hammer crusher capacity will be influenced by the material moisture, fineness of crused material, motor powder and negative pressure wind etc. Normally, the water-drop hammer crusher is enough for the poultry and livestock feed making, but for aquatic feed making, micro grinder is also needed as secondary crusher.

Batching scale: 

Batching scale shall be designed before the mixing mached, and normally installed upper the mixer, sensers on the scale weigh the materials per bacth per the ingredient content and then discharge into the mixer. Additive materials can be added into the mixer directly or weigh it separatly with a small scale to ensure the ingredient proportion.

Mixer: 

Used to mix certain content materials according to the ingredient in its cavity, plus the oil/ molasses or other small proportion materials evenly, to guarantee the final feed with comprehensive nutrition. CV data, mixing time and material residues are the main technical parameters. Normally, there are three types mixing machine for choice per customer’s requiremetns, such as double circle mixer, single shaft paddle mixer and double shaft paddle mixer,sometimes vertical mixer is suitable for quite small capacity animal feed plant.

Pellet mill: 

Ring die pellet mill as example, it is used to press mash feed/meal feed into pellet shape, and the pellet dia is determined by the animal type. The pellet mill is usually equipped with screw feeder and single or double layer air conditioner. Conditioning is accomplished by the addition of controlled amounts of high temperature steam to kill bacterias and gelatinize starch. The ring die compression ratio, pellet dia, steam supplyment etc may influence the pellet mill capacity.

Cooler: 

Aims to reduce the temperature of the pellet after pelleting from the pellet mill machine, also can remove the moisture in it,the pellet temperature after pelleting can be 80-90 degree and shall cool down to 30 degree through it, then we can pack into bags and delivery or storage directly. There are different level indicate on it to remark different sizes pellet level.

Packing machine: 

Usd to pack feed into bags automatic or semi-automatic, it usually equipped with belt conveyor and sewing machine, some large factories may also use palletizer after it to instead of workers. Of course, customer also can choose use semi automatic if the capacity is not big enough and the labor cost is not high in local market.

http://www.univermachines.com/